1. How to paste the mobile phone film
Whenever a new device is purchased, people will add a protective film to its screen, but they are not able to stick the film, and the sticking of the protective film is generally done by the film-selling business. However, if the protective film is found to be crooked in the future, or when it is worn out and needs to be replaced, it is quite troublesome to go to the merchant to do it again. In fact, sticking a film is not a "difficult job". As long as you choose high-quality protective film products and have a clear understanding of the process of sticking the film, it is really not difficult to stick the film yourself. In the following article, the editor of the purchase network will explain the whole process of the protective film in detail.
Tools/Materials
Phone film
wipe
scratch card
Dust sticker x2
Steps/Methods:
1. Clean the screen.
Use a BG wipe (or soft fiber cloth, glasses cloth) to wipe the screen to thoroughly clean the phone screen. It is best to wipe the screen in a windless and tidy indoor environment to reduce the impact of dust on the film, because thorough cleaning before the film is necessary. Everyone knows that if you accidentally get dust on it, it will directly affect the result of the film. , it will cause bubbles after the film is applied, and the film will fail in severe cases. Many poor-quality protective films are due to the fact that they cannot be cleaned after entering the dust during the filming process, which directly destroys the silicone layer of the protective film, making the film scrapped and unusable.
Use the BG dust removal sticker to clean up stubborn dirt. After cleaning with a cloth, if there is still stubborn dirt on the screen, it is important not to use a wet cloth to clean it. Just stick the BG dust removal sticker on the dust, then lift it up, and use the adhesive force of the dust removal sticker to clean up the dust. After the BG dust removal sticker is used, it is pasted back to the original backing paper, which can be used repeatedly.
2. Get an initial impression of the film.
Take the protective film out of the package, do not tear off the release film, put it directly on the screen of the mobile phone to get a preliminary impression of the film, especially observe the fit of the edge of the film and the screen of the mobile phone, and have a rough idea of the position of the film This will help with the subsequent filming procedure.
3. Tear off a part of the No. 1 release film.
Observe the label on the protective film, tear off a part of the release film marked with "①", and take care to avoid touching the adsorption layer of the protective film with your fingers. Each protective film product is divided into three layers, of which ① and ② are release films, which are used to protect the protective film in the middle.
4. Slowly stick the protective film to the phone screen.
Align the adsorption layer of the protective film with the corners of the screen, making sure that the positions are aligned, and then attach it carefully. While pasting, tear off the release film No. 1. If bubbles are generated during the filming process, you can pull the film back and stick it again. After confirming that the position of the film is completely correct, tear off the No. 1 release film completely. After the entire protective film is attached to the screen, if there are still air bubbles, you can use the BG scratch card to scratch the screen to discharge the air.
5. Completely tear off the No. 2 release film.
6. Completely tear off the No. 2 release film, and wipe the screen with a rag. The whole filming process is completed.
Film points:
1. Thoroughly clean the screen before sticking the film, especially without leaving dust.
2. After the release film of No. 1 is torn, pay special attention that the fingers cannot touch the adsorption layer, otherwise the effect of the film will be affected.
3. During the filming process, do not tear the release film at one time, it should be peeled and pasted at the same time.
4. Make good use of scratch cards for defoaming.
2. Answers to frequently asked questions about mobile phone stickers
1. Answers to questions related to mobile phone protective film
Mobile phone film is believed to be the first thing mobile phone users will do after buying a mobile phone. However, facing the wide variety of protective films on the market, are you feeling dizzy? How to solve the dust and residual air bubbles during the filming process? This issue of machine skills will bring you the answers to the above questions.
Classification of film: frosted and high-definition film
In the face of many mobile phone protective films on the market, the price ranges from a few yuan to several hundred yuan, and the editor of the purchase network is also dizzy. However, when purchasing, users can start from their actual situation and start with the type of film. Mobile phone protective films can be roughly divided into two categories - matte and high-definition films. Of course, both types of foils have their strengths and weaknesses.
The matte film, as the name implies, has a matte texture on the surface. The advantages are that it can effectively prevent fingerprints from invading, easy to clean, and has a unique feel, giving users a different operating experience. The disadvantage is that some low-grade frosted films will have a slight impact on the display effect due to poor light transmittance.
In addition, the so-called high-definition protective film is actually relative to the frosted protection, referring to the general ordinary film, named because of its better light transmittance than the frosted film. Although the high-definition film has a light transmittance that is unmatched by the frosted film, the high-definition film is easy to leave fingerprints and is not easy to clean.
Of course, there are also mirror protective films, anti-peeping protective films and anti-radiation protective films on the market, but these can be classified as high-definition protective films, but they only add features on the basis of high-definition films. After understanding these, users can choose according to their actual situation. It can't be said that the protective film of that material is better, it can only be said that it will be more suitable for you.
In addition, various parameters such as 99% light transmittance and 4H hardness are just tricks for JS to fool users. Now the highest light transmittance is optical glass, and its light transmittance is only about 97%. It is impossible for a screen protector made of plastic materials to reach such a level of 99% light transmittance, so the promotion of 99% light transmittance is an exaggeration.
Whether or not to stick the film is the question!
Since the development of mobile phones, the overall materials have been very particular, and the three defenses are at every turn. Do I still need a protective film? I believe this is an eternal topic for mobile phone users, and in fact, the editor believes that no matter how hard the material is, there will be scratches one day, so I think it is better to stick it.
Although Corning glass has been specially treated, it has a certain hardness and wear resistance, and general substances will not scratch it. However, in actual use, it is not as good as expected. The editor personally demonstrated the "consequences" of "streaking". Although there are no obvious scratches, the glass surface is covered with thin silk marks.
In fact, Corning Gorilla Glass has a hardness index, and the so-called scratch resistance is actually just "competitive hardness". For example, if 3 hardness units are used as the hardness index of fingernails, then Corning Gorilla's is 6 hardness units, so if you scratch the screen with your fingernails, you cannot scratch the screen, but your fingernails will wear out. Also, according to research, the average hardness index of metals is 5.5 hardness units. If you look at this index, the metal key is not easy to scratch the Corning Gorilla. However, in fact, the hardness index of some alloys also reaches 6.5 hardness units, so the film is still necessary.
2. Frequently Asked Questions and Answers in the Process of Mobile Phone Filming
Problems with stickers
Now many netizens buy film, and merchants provide film service. However, there are also many people who want to try the taste of the film by themselves. The following part is used as a film experience to share with you. The editor summarizes the most common problems encountered in the filming process, which is nothing more than dust flying in or bubbles remaining during the filming process. The handling of the above two situations is actually very simple, and the specific corresponding methods are as follows:
1. The disposal method of entering dust:
During the filming process, it is very common for dust to fly between the screen and the protective film, and netizens don't have to feel annoyed about it. Because when the dust sticks to the protective film or the screen, the dust particles just stick to the protective film or the screen. If dust particles are attached to the screen, do not attempt to blow them away with your mouth. Because this may lead to more serious consequences, there may be a situation where saliva splashes on the screen. The correct way is to blow air at the dust particles, or wrap the index finger with transparent glue in reverse, and then stick the dust particles away.
If the dust particles are attached to the protective film, you can also stick it away with transparent glue, but you cannot blow the dust particles away with air. Because blowing with air cannot blow away dust particles, it may cause more dust particles to adhere to the protective film. The correct treatment method is to use one hand to hold the film with transparent glue, and then use the other hand to stick the transparent glue to the dusty place, quickly stick the dust away, and then continue to apply the film. In the process of dust removal, do not directly touch the inner surface of the film with your hands, otherwise grease will be left, which is difficult to handle.
2. Residual bubble treatment method:
After the entire film is adhered to the screen, there may be residual air bubbles, and the treatment method is much simpler than dusting. In order to prevent the generation of residual air bubbles, you can use a credit card or a hard plastic sheet to gently push the film along the direction of the film during the filming process. This ensures that no air bubbles are created during the filming process. While pressing and pushing, it is also necessary to observe whether ther
Post time: Sep-06-2022