Mobile phone toughened film how to stick?

Steeled glass is not a new thing, but tempered glass used in mobile phones is only developed in recent years, tempered glass film development speed is rapid, the prospect is very big.

glass the screen
Tools / feedstock
Alcohol wipe the cloth vacuuming paper, wipe the cloth toughened glass film
Methods / Steps
1 Prepare the above four tools: tempered glass film, wipe cloth, vacuum paper, wipe cloth
2. Wipe the cloth with alcohol to wipe off the grease and bacteria on the surface of the mobile phone
3 Use vacuuming paper to clean the alcohol with a small amount of dust
4. Tear open the only layer of detached film of the tempered glass film
5 Hands holding the edge, slowly vertical down
6. Click in the middle, the toughened glass film will automatically suck
7 Finally, wipe the cloth to check the surface of the toughened glass film that has been pasted and the mobile phone, and be finished.
matters needing attention
When sticking the film, do not leave dust on the surface of the phone, otherwise there will be bubbles when sticking the toughened glass film. If the toughened glass film is accidentally stuck to the dust, the dust adsorption off the toughened glass film can be washed and reused, which will not affect the viscosity


Post time: Mar-23-2023